storz and bickle vaporizer

How to Choose the Right Vape Coils: A Beginner’s Guide

5 minutes, 16 seconds Read
  1. What is an evaporator and how does it work
  2. Different types of evaporators and their features
  3. How to choose the right vaporizer for your POD system or mod
  4. How to properly install and replace the evaporator
Any person, as soon as he gets a little involved in the topic of vaping, begins to understand that this process has the greatest opportunities for, so to speak, personalizing the vaping session. In other words, anyone can buy a POD system Storz and Bickle to their taste and configure it most suitably. An important factor that will be responsible for the operation of the vape is the evaporator because it is thanks to its functioning that vaporization occurs. Today we will look at the main types of atomizers, and talk about their advantages and disadvantages, to make it easier for you to make the right choice of electronic cigarette or even replace this spare part in it.

What is an evaporator and how does it work

In vaporizers, there is an element that contains a heated metal coil and an absorbent material (usually cotton in the form of cotton wool) saturated with liquid. When the vape button is pressed, an electrical current passes through the coil and heats it enough to turn the liquid into vapor. This vapor then exits through the vent in the vaporizer and enters the vaper’s lungs. Some electronic cigarettes have a built-in atomizer that cannot be removed. These are essentially disposable vapes. Other POD systems can replace this component. When purchasing the latter, it is very important to immediately clarify how accessible this part is and whether it can be easily found in the store. It’s best when the kit comes with a spare atomizer.

Different types of evaporators and their features

If it seemed to you that everything is so simple, then we hasten to convince you of this. There are more than one or two types of atomizers, and they all differ in their operating principle.
  • Single-coil evaporators.
The most common type of atomizer, which has a single coil. They are usually more affordable and easier to use, although their power may suffer as a result. The amount of steam they are capable of producing is quite small.
  • Double evaporators (Dual-coil).
As you may have guessed, they work through two interconnected coils, which increases the power of the device and significantly increases steam generation. Coils can be not only metal but also ceramic (CELL), as well as mesh (Mash). The last two are needed for more uniform heating of the liquid and high-quality vaporization, but they require more power and are more difficult to maintain. In addition, evaporators are divided by type of operation:
  • RTA (Rebuildable Tank Atomizer). The evaporation chamber is located directly in the cartridge of the POD system, and the liquid here enters through the ducts during the process of drying the wick.
  • RDA (Rebuildable Dripping Atomizer). There is no liquid tank provided here; the liquid itself is located directly in the body of the drip device.
  • RDTA (Rebuildable Dripping Tank Atomizer). There is a container for liquid, and the ends of the wick are located directly in it.
Next come features related to the design of the electronics, such as tightness, type of airflow, arrangement of racks for winding, etc. If you have little experience in choosing this device, then we recommend paying attention to popular POD systems, understanding them, and only then experimenting further in this direction.

How to choose the right vaporizer for your POD system or mod

When choosing an evaporator, the following factors must be considered:
  1. Power.
The power of your device and its battery capacity will determine what type of vaporizer you can use. If you want to get thick, strong smoke with a rich taste, then buy more expensive but more powerful devices.
  1. Resistance
The resistance of the evaporator affects the amount of steam and its temperature. The lower the resistance, the more steam and the higher the temperature. However, low-resistance atomizers also use more liquid to create the same amount of vapor and can shorten the device’s battery life.
  1. Taste.
Each type of evaporator, in theory, has a specific liquid that is intended for it according to the manufacturer’s recommendation. In fact, this is nothing more than marketing, but if you are still inclined to trust the capitalist machine, then familiarize yourself with the range of liquid flavors for a particular atomizer in advance.
  1. Transportability.
To avoid the burden of using a vape, try to choose the most compact and transportable devices. However, if this is not a priority for you and you mostly vape at home or in the workplace, you may want to sacrifice small size for power and reliability. Start with inexpensive devices if you are not sure of your choice. Over time, you will decide which electronic cigarette is ideal for you.

How to properly install and replace the evaporator

Installing and replacing the evaporator may vary slightly depending on the device, but the general process is as follows:
  1. Open the lid or unscrew the evaporator base.
  2. Remove the old evaporator.
  3. Install a new one.
  4. Pour the liquid onto the cotton and leave it for a few minutes to saturate it with liquid.
  5. Reassemble your device.
  6. Let your new vaporizer sit for a few minutes before you start vaping.
Never turn on the device before it is fully assembled and ready for use. It is best to follow the manufacturer’s instructions for replacing the atomizer. It can be in the device packaging or on the brand’s official website. We hope this article has helped you understand the basics of choosing and using vape coils and made the process easier and more understandable. If she didn’t do it completely or you’re simply not sure that your beginner’s experience will be enough to choose your main vape, we recommend that you look at us at STORZ AND BICKLE – our assortment will pleasantly please you, Storz and Bickle is a vape online store where you can find different types of a wide range of vaporizers with there accessories at very low prices as they are providing storz bickle black friday. And our managers will always help you with your choice. Welcome! Recommended: What You Should Know About Surgical Jaw and Chin Contouring

Similar Posts

In the vast digital landscape where online visibility is paramount, businesses and individuals are constantly seeking effective ways to enhance their presence. One such powerful tool in the realm of digital marketing is guest posting, and emerges as a high authority platform that offers a gateway to unparalleled exposure. In this article, we will delve into the key features and benefits of, exploring why it has become a go-to destination for those looking to amplify their online influence.

Understanding the Significance of Guest Posting:

Guest posting, or guest blogging, involves creating and publishing content on someone else's website to build relationships, exposure, authority, and links. It is a mutually beneficial arrangement where the guest author gains access to a new audience, and the host website acquires fresh, valuable content. In the ever-evolving landscape of SEO (Search Engine Optimization), guest posting remains a potent strategy for building backlinks and improving a website's search engine ranking. A High Authority Guest Posting Site:

  1. Quality Content and Niche Relevance: stands out for its commitment to quality content. The platform maintains stringent editorial standards, ensuring that only well-researched, informative, and engaging articles find their way to publication. This dedication to excellence extends to the relevance of content to various niches, catering to a diverse audience.

  2. SEO Benefits: As a high authority guest posting site, provides a valuable opportunity for individuals and businesses to enhance their SEO efforts. Backlinks from reputable websites are a crucial factor in search engine algorithms, and offers a platform to secure these valuable links, contributing to improved search engine rankings.

  3. Establishing Authority and Credibility: Being featured on provides more than just SEO benefits; it helps individuals and businesses establish themselves as authorities in their respective fields. The association with a high authority platform lends credibility to the guest author, fostering trust among the audience.

  4. Wide Reach and Targeted Audience: boasts a substantial readership, providing guest authors with access to a wide and diverse audience. Whether targeting a global market or a specific niche, the platform facilitates reaching the right audience, amplifying the impact of the content.

  5. Networking Opportunities: Guest posting is not just about creating content; it's also about building relationships. serves as a hub for connecting with other influencers, thought leaders, and businesses within various industries. This networking potential can lead to collaborations, partnerships, and further opportunities for growth.

  6. User-Friendly Platform: Navigating is a seamless experience. The platform's user-friendly interface ensures that both guest authors and readers can easily access and engage with the content. This accessibility contributes to a positive user experience, enhancing the overall appeal of the site.

  7. Transparent Guidelines and Submission Process: maintains transparency in its guidelines and submission process. This clarity is beneficial for potential guest authors, allowing them to understand the requirements and expectations before submitting their content. A straightforward submission process contributes to a smooth collaboration between the platform and guest contributors.