The AP.setup is a configuration method that allows you to set up your wifi range extender as a wireless access point to create a new Wi-Fi network or extend the range of an existing Wi-Fi network. An access point is a device that allows wireless devices to connect to a wired network using Wi-Fi.
When you configure your ap.setup as an access point, it creates a new Wi-Fi network with a new SSID (network name) and password. Devices can then connect to this new Wi-Fi network and access the internet or other devices on the wired network that the extender is connected to.
Ap Extender login | Ap.setup
Once you are on the login page, you will be prompted to enter your username and password. If you have not yet set up your ap extender login, the default username is “admin” and the default password is “password”. If you have previously changed the login credentials, enter the current username and password to log in.
Here are the steps to set up your ap extender login as an access point:
- Connect the Extender to the plug.
- Use your web browser for access to Ap.setup right away.
- To access the Ap Setup page, enter your username and password.
- You may configure and manage your Wavlink extender once you’ve logged in.
- If ap.setup isn’t functioning, contact our help.
- During initial Ap.setup, make sure your extender is close to the router.
Note:If you need any assistance regarding your wavlink ac1200 wifi extender setup so contact our technician or visit the official website that is ap extender setup.
How can I configure my WiFi extender using Ap.setup?
Using the Ap.setup page, you can setup a new Extender to extend the range of your WiFi network. Utilising this offline web page, there are two ways to configure the device. One is to setup the device through a browser, while the other requires setup it up through WPS. Before I explain them both, there is something else you need to understand.Extender Mode and Access Point Mode are the two choices for setup offered by a WiFi extender. Here is an overview of each mode:
- Connect the Wavlink extender to the primary WiFi router before setup it.
- After hitting the power button, wait for the led light to turn on.
- Now install the repeater on any wireless device, such as a laptop or phone.
- To connect to the Wavlink-N network, first choose the WIFI settings option.
- Enter ap.setup into the address bar of any available web browser.
- The Wavlink Range Extender Configuration page has been reached.
- Using the AP extender process, connect your extender to your main network or modem.
Can’t Connect To AP.Setup?
The steps listed below can be used to access the AP Extender Setup page:
- To connect to Ap.setup, plug the extension into an electrical outlet.
- As soon as the repeater’s power led the light turns on.
- Pick up a tablet or laptop and go to the wireless settings section.
- Obtain a connection to the common WIFI Extender network.
- Now open any web browser, including Mozilla Firefox, Google Chrome, and Microsoft Edge.
- Then, to reach the AP new extender setup page, type ap.setup into the address bar.
- Follow the instructions to connect the extender to your current router or modem.